Assembly Instruction

. Position the Front rail (D) exactly as shown (Fig.2). Slot the 1/4 x 1

1/2” Bolt (K) through Front rail (D) Curve

washer (

)

. Attach the Front

rail (D) onto the side panel as shown in the diagram. Slot the 1/4 x 1

1/2”Bolt (I) into the

cheat on the Left panel (B) and Right panel (C), tighten with the Allen key (

) provided.

Position the assembled frame (assembled in step 1) exactly as shown.

(Fig.2) Align the pre

drilled holes on the

Left

panel

(B)

and Right panel (C)

with the pre

drilled holes on the cleat on the Left panel (B). Insert the

Washer (L), Spring

washer (M) and

1/4

1/4” Bolt (I) through pre

drilled holes on the Left panel (B)

and the pre

drilled holes on the

assembled frame, tighten with the Allen key (

) provided.

(Fig. 2)

. Attach the Top (A) onto the assembled frame (assembled in step 2) by inserting the pre

attached wooden dowel

s on

the top horizontal rails of the side panels into the pre

drilled holes on the Top (A). Insert

1/4

1/4” Bolt (I)

into the

pre

drilled holess at both ends of the Top. Once all bolts are in place, fully tighten tem using the 4mm Allen key (

)

provid

ed.

(Fig.

)