Assembly Instruction

2
.
Position the Panel (C
) and the assembled frame (assembled in step 1) exactly as shown. (Fig.2) Align the pre
-
dri
lled holes on the Side panel (C
) with the pre
-
drilled holes on the assembled frame. Insert the
Washer (L), Spring
washer (M)
and
1/4
x
1
-
1/4”
Bolt (I) through pre
-
drilled holes on the side panel, tightening with the Allen key (P)
provided.
(Fig. 2)
3
. Attach the Top (A) onto the assembled frame (assembled in step 2) by inserting the pre
-
attached
wooden dowels on
the top horizontal rails of the side panels into the pre
-
drilled holes on the Top (A). Insert Allen Bolts into the pre
-
drilled
holes at both ends of the Top. Once all bolts are in place, fully tighten t
h
em using the 4mm Allen key (
Q
) pr
ovided.
(Fig.
3
)
C
I
L
M
K
P
A
I
M
L