Assembly Instruction

2
.
Position the Panel (C ) and the assembled frame (assembled in step 1) exactly as shown. (Fig.2) A
lign the pre
-
drilled holes on the Side panel (C ) with the pre
-
drilled holes on the assembled frame. Insert
the Washer (
H
), Spring
washer (
I
) and
1/4
x
1
-
1/4”
Bolt (
G
) through pre
-
drilled holes on the side panel, tightening with the Allen key (
L
)
provided.
(Fig. 2)
3
. Attach the Top (A) onto the assembled frame (assembled in step 2) by inserting the pre
-
attached wooden dowels on
the top horizontal rails of the side panels into the pre
-
drilled holes on the Top (A). Insert
Allen Bolts into the pre
-
drilled
hole
s at both ends of the Top. Once all bolts are in place, fully tighten t
h
em using the 4mm Allen key (
L
) provided.
(Fig.
3
)
C
G
I
H
D
A
G
I
H