Assembly Instruction

pottery barn kids

CAMP STORAGE BED

PRE-ASSEMBLY:

• Please read all instruction before beginning assembly. The illustrations provided allow for easier

assembly when used in conjunction with the assembly instructions.

• Remove all parts and hardware from box and lay out on a carpeted or scratch-free work surface, as

this will avoid damaging any parts during assembly. The shipping box provides and ideal work

surface. Do not dispose of any contents until assembly is completed to avoid accidentally

discarding small parts or hardware.

• For your safety and ease, adult assembly by two people is recommended.

• Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts

or hardware.

• Use the parts and hardware lists to identify and separate each of the pieces included prior to

starting assembly.

• Note: DO not fully tighten all bolts until all parts are in place. Failure to follow these instructions may

cause the bolts to misalign during assembly.

• If using power tools to aid in assembly please use caution. Power tools can damage hardware of

split wood.

PARTS INCLUDED:

(A) Headboard – 1pc

(B) Footboard – 1pc

(D) Side rail – 1pc

(E) Slat roll – 1pc

(F) Storage box – 1pc

(with 3 drawers)

HARDWARE ENCLOSED:

(G) Mending plate72x23x20mm – 2pcs

(H) Small Phillips head screw8x15mm – 6pcs

(I) Large Phillips head screw 8x30mm – 28pcs

PAGE 1
pottery barn kids CAMP STORAGE BED PRE-ASSEMBLY: • Please read all instruction before beginning assembly. The illustrations provided allow for easier assembly when used in conjunction with the assembly instructions. • Remove all parts and hardware from box and lay out on a carpeted or scratch-free work surface, as this will avoid damaging any parts during assembly. The shipping box provides and ideal work surface.
PAGE 2
TOOLS REQUIRED: Phillips Head Screw Driver (not included) ASSEMBLY INSTRUCTIONS: 1. Hold the Back rail (C) and Side rail (D) up to slots on the legs of the Headboard (A) and insert the hooks of each side rail into the slots. Push down firmly on the top of side rails until they seat themselves over the pins inside the legs slots as shown. 2. Repeat Step 1 with the Footboard (B). 3. Carefully lay the Storage box (F) under the Side rail (D) as shown, ensuring the drawer front and the side rail are flush.
PAGE 3
5. Lay the Slat roll (E) in between the side rail and use all of the Large Phillips Head screws (I) to fasten slats to the side rail with the Phillips head screwdriver (not included). 6. Retighten all bolts and screws to make sure all are tight and bed structure is rigid. Adjust the levelers under the bedpost as shown to level the bed on your floors. We recommend all screws be periodically for safety. CARE INSTRUCTIONS: • Dust often using a clean, soft, dry lint-free cloth.
PAGE 4