Assembly Instruction

Page 6/8
4. Place the Slat Roll (E) between the Side Rails (B) and fasten using (28) Long Wood Screws (O), (Figure 5).
5. Insert (8) Smooth metal Dowels into the pre-drilled holes on top of the Desk End (F) and Storage End (G). Carefully lift
and place the Upper Bunk on top of the Desk End (F) and Storage End (G) units by aligning the pre-drilled holes on
bottom of upper bunk bed post to the Smooth Metal Dowels, (Figure 6).
P.
O.
Figure 5
Figure 6