Assembly Instruction

pottery barn kids

CAMERON STORAGE BED TWIN

IMPORTANT SAFETY INSTRUCTIONS:

Please read all instructions carefully before assembling.

For your safety, assembly by two people is recommended.

PARTS INCLUDED:

HARDWARE ENCLOSED:

(28) 4 x 30mm Wooden Screws (N)

(1) Storage headboard (A)

(1) Platform bed FB (B)

(2) Side rail (C)

(1) Slat (D)

** Hardware is packed in Platform Bed Twin Footboard/Siderail/Slat package.

PRE-ASSEMBLY:

• Remove all parts and hardware from the box and lay out on a clear, carpeted or scratch-free work surface,

as this will avoid damaging any parts during assembly. The shipping box provides an ideal work surface.

• Do not dispose of any contents until assembly is completed to avoid accidentally discarding small parts or

hardware.

• Use the parts and hardware lists above to identify and separate each of the pieces included.

• The illustrations provided allow for easier assembly when used in conjunction with the assembly instructions.

• Note: Do not fully tighten all bolts until all parts are in place. Failure to follow these instructions may cause

the bolts to misalign during assembly.

• If using power tools to aid in assembly please use caution. Power tools can damage hardware or split

wood.

ASSEMBLY INSTRUCTIONS:

1. Determine the desired location of bed. One person should hold the Headboard (A) in a vertical position, tilted

slightly forward. Attach each Side rail (C) to the Headboard (A) by inserting the hooked ends of the Side rail

Repeat with footboard (B). (Fig. 1)

(Fig. 1)