Assembly Instruction

4. Place the Top Panel (A) onto the assembled piece and secure using (4) 1 ¼” x 28mm Allen Bolt (K), ¼”
Spring Washers (L), and ¼” Flat Washers (M). Place this portion of the assembly to the side of your work area.
(Fig. 3)
(Fig. 3)
5. Attach the Back stretcher top (H) and Back stretcher bottom (I) with (8) 4 x 30mm Long Wooden Screws (N)
through the left and right Bottom side panel (G). (Fig. 4)
6. Secure the left and Bottom side panel (G) with Bottom front panel (F) using (6) 1 ¼” x 28mm Allen Bolt (K), ¼”
Spring Washers (L), and ¼” Flat Washers (M) on each side. (Fig. 4)
(Fig. 4)