Assembly Instruction

pottery barn kids
CAMERON STORAGE HEADBOARD TWIN
IMPORTANT SAFETY INSTRUCTIONS:
Please read all instructions carefully before assembling.
For your safety, assembly by two adults is recommended.
HARDWARE ENCLOSED:
(1) Allen Key (J)
(22) ¼” x 28mm Allen Bolt (K)
(22) ¼” Spring Washer (L)
(22) ¼” Flat Washer (M)
(8) 4 x 30mm Long Wooden Screws (N)
(2) 4 x 25mm Medium Wooden Screws (T)
(4) 3 x 12mm Small Wooden Screw (U)
(4) Connecting bracket square (O)
PARTS INCLUDED:
(1) Top Panel (A)
(2) Top side panel (Left-Right) (B)
(1) Divider (C)
(1) Shelf (D)
(1) Back panel (E)
(1) Bottom front Panel (F)
(2) Bottom side panel (Left –Right) (G)
(1) Stretcher at back (Top) (H)
(1) Stretcher at back (Bottom) (I)
PRE-ASSEMBLY:
Remove all parts and hardware from the box and lay out on a clear, carpeted or scratch-free work surface,
as this will avoid damaging any parts during assembly. The shipping box provides an ideal work surface.
Do not dispose of any contents until assembly is completed to avoid accidentally discarding small parts or
hardware.
Use the parts and hardware lists above to identify and separate each of the pieces included.
The illustrations provided allow for easier assembly when used in conjunction with the assembly instructions.
Note: Do not fully tighten all bolts until all parts are in place. Failure to follow these instructions may cause
the bolts to misalign during assembly.
If using power tools to aid in assembly please use caution. Power tools can damage hardware or split
wood.
CARE INSTRUCTIONS:
Dust with a clean, soft cloth.
We do not recommend the use of chemical cleansers, abrasives, or waxing of our lacquered finishes.
Do not climb on the Cubby.
Thank you for your purchase.
stores | catalog | www.potterybarnkids.com
USA 1.800.290.8181

Summary of content (6 pages)