Assembly Instruction

4. Align and insert the wooden dowels of both the Long Divider (E) and the Short Divider (F) into the pre-drilled
holes on the top and underside of the Lower Shelf (D), as shown below. Ensure that the labels with arrow on
the Long/Short Dividers (E & F) are facing each other. (Fig. 4).
5. Connect the Bottom Panel (G) to the bottom of the Left and Right Side Panels (A & B) by aligning the pre-
drilled holes of the Bottom Panel (G) with those on the bottoms of the Left and Right Side Panels (A & B).
Secure by inserting an Allen Bolt (M) through a Spring Washer (N) and a Flat Washer (O) through the pre-
drilled holes of the Bottom Panel (G) and into the pre-drilled holes of the Left and Right Side Panels (A & B).
Tighten using an Allen Key (L). (Fig. 5).
E.
F.
E.
F.
G.
L.
M.
N.
O.
(Fig. 4)
(Fig. 5)