Assembly Instruction

Page 2/4
ASSEMBLY INSTRUCTIONS:
1. Align and connect the wooden dowels on each end of the Shelf (F) to the pre-drilled holes on Left/Right
Panels (A&B) (Figure 1).
2. Align and connect the pre-drilled holes on Bottom Panel (D) to the wooden dowels on the Left/Right Side
Panels. Slide a Spring Washer (I), a Flat Washer (J) into an Allen Bolt (H) and insert the Allen Bolt from
bottom of the Bottom Panel (D) into the Left/Right Side Panels using an Allen Key (G).
3. Position the assembled piece upright. Slide the Back Panel (C) into slots on the Left/Right Side Panels.
D
F
A
B
H
J
I
G
C
Figure 1
Figure 2
Figure 3