Assembly Instruction

ManualsBrandsPottery Barn ManualsOther RoomsPottery Barn Cameron Door Frame Cubby for XO Doors

Page 1/4

pottery barn kids

CAMERON CUBBY OPEN FRAME

PRE-ASSEMBLY:

• For your safety and ease, assembly by two adults is recommended.

• Please read all instructions before beginning assembly. The illustrations provided allow for easier assembly

when used in conjunction with the assembly instructions.

• Remove all parts and hardware from box and lay out on a carpeted or scratch-free work surface. The shipping

box provides and ideal work surface. Do not dispose of any contents until assembly is completed to avoid

accidentally discarding small parts or hardware.

• Use the parts and hardware lists to identify and separate each of the pieces included prior to starting

assembly.

• Note: DO not fully tighten the bolts until all parts are in place. Failure to follow these instructions may cause

the bolts to misalign during assembly.

• The use of power tools for assembly is not recommended. Power tools can damage hardware or split wood.

HARDWARE INCLUDED:

(G) Allen Key – 1pc

(H) Allen Bolt 1/4” x 28mm – 8pcs

(I) Spring Washer – 8pcs

(J) Flat Washer – 8pcs

(K) Long Wood Screw

4 x 25 mm – 2pcs

(L) Plastic Cap – 2pcs

(M) T-Shape Bracket – 2pcs

(N) Square Bracket – 1pc

(O) Short Wood Screw 3 x 12mm

– 16pcs

PARTS INCLUDED:

(A) Left Side Panel – 1pc

(B) Right Side Panel – 1pc

(D) Bottom Panel – 1pc

(E) Top Panel – 1pc

(F) Shelf – 1pc

TOOLS REQUIRED:

Philips Screwdriver (Not included)

OPTIONAL PARTS (SOLD SEPARATELY):

(T) Left Door – 1pc

(U) Right Door – 1pc

Note: Pictures are for reference only. Doors are

sold separately. This package contains only the

Cubby Open Frame.

Summary of content (4 pages)

PAGE 1
pottery barn kids CAMERON CUBBY OPEN FRAME PRE-ASSEMBLY: • For your safety and ease, assembly by two adults is recommended. • Please read all instructions before beginning assembly. The illustrations provided allow for easier assembly when used in conjunction with the assembly instructions. • Remove all parts and hardware from box and lay out on a carpeted or scratch-free work surface. The shipping box provides and ideal work surface.
PAGE 2
ASSEMBLY INSTRUCTIONS: 1. Align and connect the wooden dowels on each end of the Shelf (F) to the pre-drilled holes on Left/Right Panels (A&B) (Figure 1). B Figure 1 F A 2. Align and connect the pre-drilled holes on Bottom Panel (D) to the wooden dowels on the Left/Right Side Panels. Slide a Spring Washer (I), a Flat Washer (J) into an Allen Bolt (H) and insert the Allen Bolt from bottom of the Bottom Panel (D) into the Left/Right Side Panels using an Allen Key (G). D J I G H Figure 2 3.
PAGE 3
4. Insert (4) Plastic Cap (L) into the pre-drilled holes on the Bottom Panel (D) and Top Panel (E). Place the Top Panel (E) on the assembled piece. Lift the Top Panel slightly to allow the Left/Right X/O Doors (T&U, sold separately) to fit into the Plastic Caps (L) on Bottom Panel and Top Panel. Check alignment and secure the Top Panel with the remaining (4) Allen Bolt (H), Spring Washer (I) & Flat Washer (J). 5.
PAGE 4
MENDING PLATE CONNECTIONS: • If connecting Cubby piece to Base piece, use (2) T-Shape Bracket and (12) Short Wood Screw. M O • If connecting to Cubby piece to Cubby piece, use (1) Square Bracket and (4) Short Wood Screw. N O CARE INSTRUCTIONS: • Dust often using a clean, soft, dry lint-free cloth. • Blot spills immediately, and wipe with a clean, damp, cloth. • We do not recommend the use of chemical cleansers, abrasives, or furniture polish on our lacquered finish. Thank you for your purchase.