Assembly Instruction

pottery barn kids
TIP RESTRAINT KIT
ARNING: This product is only a deterrent. It is not a substitute for proper adult supervision.
oung children may be injured by tipping furniture and the use of a tipping restraint is highly recommended.
ron Wall Cubby.
ARTS INCLUDED
W
Y
When properly installed, this restraint could provide protection against the unexpected tipping of furniture. We
recommend mounting this restraint to a wall stud.
All Parts and Hardware are included with the Came
HARDWARE NEEDED
m
P
(U) Long Screws 3x32m
(S) Plastic Restraint
- 1pc
s
(T) Plastic Wall Bracket
- 2pcs
ote: For safe mounting it is essential to use the prope rdware for your wall type. The included hardware is
. Locate a wall stud behind your furniture. Position a bracket on the stud approximately 1” below the top of the
2. racket will need to be attached to the furniture frame at the top. To do this,
3. ure bracket.
Thank you for your purchase.
stores | c com
- 2pcs
(V) Short Screws 3x19mm
N r ha
for drywall or stud mounting only. For other wall types (ie: plaster, concrete, brick…) please consult your
local hardware store.
1
furniture. Mark and drill pilot hole into the center of the stud with a 3/32” drill bit. Attach a bracket to the stud
with the long screws provided.
On the back of the furniture, a b
temporarily move the furniture into its final position and mark the location of the wall bracket on the furniture
frame. Move the furniture away from the wall and place a bracket on the mark. Mark and drill holes for
screws with 3/32” drill bit. Attach the bracket to the furniture with the short screws provided.
Move the furniture into this final position, taking care to line up the wall bracket with the furnit
Thread a strap through the bracket as shown in the illustration. Tighten strap until snug. Do not over
tighten.
-
Long wood screw
Short wood screw
Plastic wall bracket
Plastic Restraint
2pcs
atalog | www.potterybarnkids.
USA 1.800.290.8181