Assembly Instruction

ManualsBrandsPottery Barn ManualsOther RoomsPottery Barn Cameron Cubby with Doors and Dividers

pottery barn kids

CAMERON CUBBY WITH ADJUSTABLE SHELF

IMPORTANT SAFETY INSTRUCTIONS:

Please read all instructions carefully before assembling.

For your safety, assembly by two people is recommended.

PRE-ASSEMBLY:

• Remove all parts and hardware from the box and lay out on a clean, carpeted, or scratch-free work

surface, as this will avoid damaging any parts during assembly. The shipping box provides an ideal work

surface. Do not dispose of any contents until assembly is completed to avoid accidentally discarding small

parts or hardware.

• Use the parts and hardware lists above to identify and separate each of the pieces included.

• The illustrations provided allow for easier assembly when used in conjunction with the assembly

instructions.

• Note: Do not fully tighten all bolts until all parts are in place. Failure to follow these instructions may

cause the bolts to misalign during assembly.

• If using power tools to aid in assembly please use caution. Power tools can damage hardware or split

wood.

ASSEMBLY INSTRUCTIONS:

1. Secure the Left/Right Side Panel (C & D) to the Bottom Panel (B) using (4) Bolt (H), Spring Washer (I) and

Flat Washer (J). Make sure the slots on side panels are facing inwards. Slide the Back Panel (E) into the

slots of the assembled piece. (Fig. 1)

2. Place the Top Panel (A) on the assembled piece. Secure the Top Panel to the Left/Right Side Panel

using (4) Allen Bolt (H), Spring Washer (I) and Flat Washer (J). Check alignment and tighten all bolts.

(Fig. 2)

PARTS INCLUDED:

(A) Top Panel – 1pc

(B) Bottom Panel – 1pc

(D) Right Side Panel – 1pc

(E) Back Panel – 1pc

(F) Shelf – 1pc

(Fig. 2)

(Fig. 1)

TOOLS REQUIRED:

Phillips Screwdriver

(Not included)

HARDWARE LIST

(G) Allen Key

- 1pc

(H) Bolt ¼“ x 25mm

- 8pcs

(I) Spring Washer 1/4“

- 8pcs

(J) Flat Washer 1/4“

- 8pcs

(K) Shelf Support

- 4pcs

(L) Wood Screw 3 x 12mm - 16pcs

(M) Square Bracket

– 1pc

(N) T-Shape Bracket

– 2pcs

Summary of content (3 pages)

PAGE 1
pottery barn kids CAMERON CUBBY WITH ADJUSTABLE SHELF IMPORTANT SAFETY INSTRUCTIONS: Please read all instructions carefully before assembling. For your safety, assembly by two people is recommended.
PAGE 2
3. Insert (4) Shelf Support (K) into the matching pre-drilled holes. Place the Shelf (F) on the Shelf Support (K) (Fig. 3) F. 4. When connecting to other stacking Cameron cubby piece, place a T-Shape Bracket (N) over the predrilled holes on back of the cubby pieces securing with (6) Wood Screw (L). Repeat with the other TShape Bracket (N) on the other side. 5. When connecting to side Cameron cubby piece, place a Square Bracket (M) over the pre-drilled holes on the cubby pieces.
PAGE 3
pottery barn kids TIP RESTRAINT KIT WARNING: This product is only a deterrent. It is not a substitute for proper adult supervision. Young children may be injured by tipping furniture and the use of a tipping restraint is highly recommended. When properly installed, this restraint could provide protection against the unexpected tipping of furniture. We recommend mounting this restraint to a wall stud. All Parts and Hardware are included with the Cameron Wall Cubby.