Assembly Instruction
Page 1/3
pottery barn kids
CAMERON CREATIVITY CART
PRE-ASSEMBLY:
• For your safety and ease, assembly by two adults is recommended.
• Please read all instructions before beginning assembly. The illustrations provided allow for easier assembly
when used in conjunction with the assembly instructions.
• Remove all parts and hardware from box and lay out on a carpeted or scratch-free work surface. The shipping
box provides and ideal work surface. Do not dispose of any contents until assembly is completed to avoid
accidentally discarding small parts or hardware.
• Use the parts and hardware lists to identify and separate each of the pieces included prior to starting
assembly.
• Note: Do NOT fully tighten the bolts until all parts are in place. Failure to follow these instructions may cause
the bolts to misalign during assembly.
• If using power tools to aid in assembly please use caution. Power tools can damage hardware or split wood.
HARDWARE INCLUDED:
(F) Small Wood Screw 4 x 19mm
– 16pcs
(G) Long Wood Screw 4 x 38mm
– 16pcs
(H) Medium Wood Screw 4 x
30mm – 8pcs
(I) Caster – 4pcs
D.
E.
A.
B.
C.
PARTS INCLUDED:
(A) Front Side Panel – 1pc
(B) Rear Side Panel – 1pc
(C) Right Side Panel – 1pc
(D) Left Side Panel – 1pc
(E) Bottom Panel – 1pc
TOOLS REQUIRED:
Philips Screwdriver (Not included)