Assembly Instruction

Page 3/4
6. Place the Top Panel (A) on the assembled piece. Flip the Door (H) open as shown. Slide a Spring
Washer (M), Flat Washer (N) onto an Allen Bolt. Insert the Allen Bolt from bottom of the wooden cleats
located on the Left/Right Side Panel into the pre-drilled holes on the Top Panel (A). Repeat with the
remaining (3) Allen Bolts. (Fig. 6)
7. Lift and push the Drawer Box into the assembled piece. (Fig 7)
8. Place the Wooden Rod (J) on the hanger brackets inside the cubby. Secure all bolts before use. (Fig. 8)
I.
J.
A.
Fig. 6
Fig. 7
Fig. 8