Assembly Instruction

Page 2/4
3. Insert the remaining Plastic Cap (O) into the pre-drilled hole on the Left Side Panel (C) and place the Left
Side Panel (C) on the assembled piece. (Fig. 3)
4. Align and connect the Bottom Panel (B) to the assembled piece. Slide a Spring Washer (M), Flat Washer
(N) onto an Allen Bolt (L). Insert the Allen Bolt (L) from bottom of the Bottom Panel (B) into the pre-drilled
holes on the Left/Right Panel. Repeat with another (3) Allen Bolts. (Fig. 4)
5. Slide the Back Panel (E) into the grooves on the Left/Right Side Panel. Use (6) Wood Screws to secure
the Back Panel (E) to the Large/Small Shelf (F&G). (Fig. 5)
B.
Fig. 3
Fig. 4
Fig. 5
C.
O.