Assembly Instruction

Page
3
/
4
4.
Turn the
assembled piece
upright
.
Place the Top Panel
(A)
on
the
assembled piece.
Insert the Plastic
Cap (S) into the pre
-
drilled holes on bottom of the Top Panel and the Bottom Panel.
5.
Lift t
he Top Panel
(A)
a little bit to allow the hinges
on
the Door
s
(H) to go into the Plastic Cap
s
(S). Check
alignment
s
and secure the Top Panel (A) to the
L
eft/Right Side Panels
by sliding a Spring Washer (K),
Flat Washer (L) onto a Bolt (J) and inserting th
e Bolt
into the fixed wood cleats located on inside of the
left/Right Side Panels.
The Top Panel is secure
d
to the Left/Right Side Panel by (2) Bolts re
s
pectively.
Check alignment before tightening all bolts.
6.
Attach a Wood Kn
ob (N) to outside of the left door and secure it using a Machine Screw (M). Repeat with
the right door.
M.
N.
A.
H.
H.
S.
S.