Assembly Instruction

ManualsBrandsPottery Barn ManualsOther RoomsPottery Barn Cameron Counter Cabinet Base

Page

pottery barn kids

Cameron

Counter Cabinet Base

PRE

ASSEMBLY:



For your safety and ease, assembly by two adults is recommended.



Please read all instruction

before begi

nning assembly. The illustrations provided allow for easier assembly

when used in conjunction with the assembly instructions.



Remove all parts and hardware from box and lay out on a carpete

d or scratch

free work surface.

The shipping

box provides and ideal

work surface. Do not dispose of any contents until assembly is completed to avoid

accidentally discarding small parts or hardware.



Use the parts and hardware lists to identify and separate each of the pieces included prior to starting

assembly.



Note: DO

not fully tighten

the

bolts until all parts are in place. Failure to follow these instructions may cause

the bolts to misalign during assembly.



The use of power tools for assembly is not recommended

. Po

wer tools can damage hardware or

split wood.

HARD

WARE INCLUDED:

(I) Allen Key

–

1pc

(J) Bolt 1/4

”

x 28mm

–

10pcs

(K) Spring Washer

–

8pcs

(

)

Flat Washer

–

8pcs

(M) Machine Screw 5/32

“

x 25mm

–

2pcs

(N)

Wood

Knob

–

2pcs

(O) Shelf Support

–

4pcs

(

)

Long Wood Screw 3.5 x 15mm

–

0pcs

(Q) Short Wood Screw

3 x 12mm

–

8pcs

(R) Connecting Bracket

–

(S) Plastic Cap

–

4pcs

(T)

Half

moon Washer

–

2pcs

PARTS INCLUDED:

(A)

Top Panel

–

1pc

(B)

Left Side Panel

–

1pc

(D) Bottom Panel

–

1pc

(E) Rear Top Rail

–

1pc

(F) Back Panel

–

1pc

(G) Adjustable Shelf

–

1pc

(H) Door

–

2pcs

TOOLS REQUIRED:

Philips Screwdriv

er (Not included)

Summary of content (4 pages)

PAGE 1
pottery barn kids Cameron Counter Cabinet Base PRE-ASSEMBLY:  For your safety and ease, assembly by two adults is recommended.  Please read all instructions before beginning assembly. The illustrations provided allow for easier assembly when used in conjunction with the assembly instructions.  Remove all parts and hardware from box and lay out on a carpeted or scratch-free work surface. The shipping box provides and ideal work surface.
PAGE 2
ASSEMBLY INSTRUCTIONS: 1. Connect the Bottom Panel (D) to the Left Side Panel (B). Slide a Spring Washer (K), Flat Washer (L) onto a Bolt (J). Insert the Bolt from wood cleat located on bottom of the Bottom Panel into the pre-drilled holes located on the Left Side Panel (B). Secure the Left Side Panel with (2) Bolts. Do not fully tighten. 2. Align and connect the wooden dowels located on the Rear Top Rail (E) to the pre-drilled holes located on the Left Side Panel (B).
PAGE 3
4. Turn the assembled piece upright. Place the Top Panel (A) on the assembled piece. Insert the Plastic Cap (S) into the pre-drilled holes on bottom of the Top Panel and the Bottom Panel. 5. Lift the Top Panel (A) a little bit to allow the hinges on the Doors (H) to go into the Plastic Caps (S).
PAGE 4
7. Attach the Back Panel (F) to the rear side assembled piece and secure it by using (20) Long Wood Screws (P). 8. Insert the (4) Shelf Supporter (O) into the pre-drilled holes on interior sides of the Left/Right Side Panels. Place the Adjustable Shelf onto the Shelf Supporters. G. P. F. G. MENDING PLATE CONNECTIONS: When connecting cubby piece (sold separately) to the Cabinet Base piece, use (2) Connecting Bracket (R) and (8) Short Wood Screws (Q). R. Q.