Assembly Instruction

ManualsBrandsPottery Barn ManualsOther RoomsPottery Barn Cameron Bookcase Hutch

Page

pottery barn kids

Cameron

Bookcase Hutch

PRE

ASSEMBLY:



For your safety and ease, assembly by two adults is recommended.



Please read all instruction

before beginning assembly. The illustrations provided allow for easier assembly

when used in conjunction w

ith the assembly instructions.



Remove all parts and hardware from box and lay out on a carpete

d or scratch

free work surface.

The shipping

box provides and ideal work surface. Do not dispose of any contents until assembly is completed to avoid

accidentally

discarding small parts or hardware.



Use the parts and hardware lists to identify and separate each of the pieces included prior to starting

assembly.



Note: DO not fully tighten

the

bolts until all parts are in place. Failure to follow these instructions

may cause

the bolts to misalign during assembly.



The use of power tools for assembly is not recommended

. Po

wer tools can damage hardware or

split wood.

HARD

WARE INCLUDED:

(

) Allen Key

–

1pc

)

Long

Allen Bolt

”

–

pcs

(L)

Short

Allen Bolt

1/4

”

2pc

(

) Spring Washer

–

pcs

(

)

Flat Washer

–

pcs

(O) Shelf Supporter

–

8pcs

(

) Short Wood Screw

3x12mm

–

16pcs

(Q)

Medium

Wood Screw

4x19mm

–

pcs

(R)

Long

Wood Screw

4x38mm

–

pcs

(S) Half

Moon

Metal

Block

–

2pcs

(

) Square Bracket

–

4pcs

ASSEMBLY INSTRUCTIONS:

Connect the Left/Right Side Panels (G&F) with the Top

Rear

Rail (E) and Fixed Shelf (D).

asten the

Fixed Shelf

(D)

to the Left/Right Side Panels

(G&F)

slide

a Spring Washer

(M)

, Flat Washer

(N)

onto a

Short Allen Bo

lt (L)

and insert

the Short Allen Bolt (L)

from cleat located under

the

Fixed Shelf

(D)

into the

pre

drilled holes on Left/Side Panels

(G&F)

Align and attach the Top/Bottom Panels (A&B) to the wooden dowels located on the side panels. Slide a

Spring Wash

er (M), Flat Washer (N) onto a Short Allen Bolt (L) and use the Short Allen Bolt to secure the

Top/Bottom Panels (A&B) to the side panels. (Fig. 1)

PARTS INCLUDED:

(A)

Top Panel

–

1pc

(B)

Bottom

Panel

–

(C)

Adjustable Shelf

–

(D)

Fixed She

–

1pc

(E)

Top

Rear

Rail

–

1pc

TOOLS REQUIRED:

Philips Screwdriver (N

ot included)

(F)

Right Side Panel

–

1pc

(G)

ft Side Panel

–

1pc

)

Big Back Panel

–

1pc

(

)

Small Back Panel

1pc

Summary of content (3 pages)

PAGE 1
pottery barn kids Cameron Bookcase Hutch PRE-ASSEMBLY:  For your safety and ease, assembly by two adults is recommended.  Please read all instructions before beginning assembly. The illustrations provided allow for easier assembly when used in conjunction with the assembly instructions.  Remove all parts and hardware from box and lay out on a carpeted or scratch-free work surface. The shipping box provides and ideal work surface.
PAGE 2
M. A. E. M. F. G. D. B. 3. Upright the assembled unit. Secure the Top Rear Rail (E) to the Top Panel by using (4) Long Wood Screws (R). 4. Slide a Spring Washer (M), Flat Washer (N) and a Half-Moon Metal Block (S) onto a Long Allen Bolt (K). Insert the Long Allen Bolt from round cut-out located on the Top Rear Rail (E) into the pre-drilled hole on the Left/Right Side Panels securing with an Allen key (J). M. E. R.
PAGE 3
5. Secure the Big/Small Back Panels (H&I) to the assembled unit by using Medium Wood Screws (Q). 6. Insert (8) Shelf Supporters (O) into the corresponding pre-drilled holes on side panels. Place the (2) Adjustable Shelf (C) on the Shelf Supporters. C. C. C. 7. When connect the Bookcase Hutch to other Cameron Wall System units (sold separately), use the Square Bracket (T) and Short Wood Screws (P). T. P. CARE INSTRUCTIONS:  Dust often using a clean, soft, dry lint-free cloth.