Assembly Instruction

ASSEMBLY INSTRUCTIONS:

1. Position the Side rails (C) and (D) exactly as shown. (Fig 1) Attach the Wheel (P) into pre-drilled holes on

the side rails by using the 5/16" x 1" Bolt (K), Spring Washer (N), and Washer (M) Tighten with the enclosed

Spanner (Q). Repeat same process for the other 3 Wheels (Fig.1)

(Fig 1)

2. Position the Side rails with wheels (assembled in Step 1) to the Headboard (A), and insert the dowels into the

top two holes as shown. (Fig. 2) Insert (2) Barrel nuts (H) into the pre-drilled holes on one of the Side rails (C),

and then (2) 5/16" x 5-1/2" Bolts (I) through the pre-drilled holes on the Headboard (A). Tighten the connection

with the Allen key provided (R). Repeat this step with the remaining Side rail (C) at the other end of the

Headboard (A), and both sides of the Footboard (B). (Fig. 2 & 3). Note: Ensure the Barrel Nuts are positioned as

shown in the images before attempting to insert and the 5/16" x 4" Bolts (J).