Assembly Instruction

Page 3/4
4. Attach knobs to drawers using Phillips head screwdriver, as shown below. Repeat until all Knobs are re-
attached (see Fig. 4).
(Fig.4)
5. Determine the desired height for the Adjustable shelf (C). Insert the (8) Shelf Supports (D) into the pre-drilled
holes on the inner side panel of Armoire (A). Carefully place the Adjustable shelf (C) onto the Shelf Supports
(D). Make sure each Adjustable shelf (C) is properly supported by all (4) Shelf Supports (D) (see Fig. 5).
(Fig.5)