Assembly Instruction

Page 2/3
ASSEMBLY INTRUCTIONS:
1. Insert the Side Rail (C) into the hooks located on the end slots of the Front Rail with 2 drawers (A). Push firmly on
the top of the Side Rails (C) until they seat themselves over the pins inside the legs slots as shown. (Fig 1)
2. Repeat Step 1 with the Back rail (B). (Fig. 1)
3. Fix 2 Large Phillips head screws 8 x 25mm (E) to the wooden cleat of Side rail (C) as shown, tightening with a
Phillips Head Screwdriver. (Fig.2)
4. Tighten the levelers as shown. (Fig.2)
C
E
Fig. 1
Fig. 2