Assembly Instruction

Page 3/3
6. Lay the Slat roll (D) in-between the Front rail (A) and the Back rail (B), and secure to the bed frame using 32 pcs
Large Phillips head screws 8x25mm (F). Loosely tighten with the Phillips Head Screwdriver. (Fig.3)
* The Front Panel (E) can be changed from left to right as shown.
7. Tighten all bolts and screws to make sure all are tight and bed structure is rigid. We recommend all screws be
checked periodically for safety, as the hardware may loosen over time.
CARE INSTRUCTIONS:
• Dust often using a clean, soft, dry lint-free cloth.
• Blot spills immediately, and wipe with a clean, damp, cloth.
• We do not recommend the use of chemical cleansers, abrasives, or furniture polish on our lacquered finish.
Thank you for your purchase
stores | catalog | www.potterybarnkids.com
USA 1.800.290.8181
Fig. 3
F