Assembly Instruction

Page 2/4
ASSEMBLY INSTRUCTIONS:
1. Lay the Left and Right Bottom Boards (A) on either side of the Center Bottom Board (B) with the pre-drilled
holes facing up, as shown in Figure 1. Attach (2) Cross Bars (C) to the bottom boards by inserting (12)
Long Wood Screws (G) into the pre-drilled holes of each cross bar, tightening with the Philips Screwdriver.
2. Turn assembled base upside down. Insert the wooden dowels on the ends of the Cross Bars (C) into the
pre-drilled holes on the Long Side Rails (D & E), as shown in Figure 2. Press firmly to ensure the Left
and Right Bottom Boards (A) sit in the slots of the Long Side Rails (D & E).
D
E
G
B.
A.
A.
Figure 1
Figure 2
A
B
A