Assembly Instruction

ManualsBrandsPottery Barn ManualsBedroomPottery Barn Allie Iron Bed

pottery barn kids

IRON BED AND CANOPY (EACH SOLD SEPARATELY)

CAUTION: This item contains small parts that have sharp points and edges in

the unassembled state. Care should be taken when unpacking and assembling

this item.

Please read all instructions before beginning assembly.

For ease of assembly two people are recommended.

Save all packing materials until assembly is complete to avoid accidentally

discarding smaller parts or hardware.

PARTS INCLUDED:

(1) Headboard (A)

(1) Footboard (B)

(2) Side Rail (C)

(3) Metal Support Slats (D)

(2) Short Canopy Post (E) (For Canopy only)

(2) Long Canopy Post (F) (For Canopy only)

(2) Long Stretcher (G) (For Canopy only)

(2) Short Stretcher (H) (For Canopy only)

(4) Finial Base (I)

(4) Finial (J)

(18) Bolt Ø1/4”x3/4” #1

(12) Small Rubber Washer #2

(1) Allen Wrench #3

(12) Metal Washer #4

(6) Nuts #5

(1) Open Wrench #6

(8) Large Rubber Washer #7

(4 pieces used for bed only)

(4) Plug #8 (For canopy only)

Summary of content (4 pages)

PAGE 1
pottery barn kids IRON BED AND CANOPY (EACH SOLD SEPARATELY) CAUTION: This item contains small parts that have sharp points and edges in the unassembled state. Care should be taken when unpacking and assembling this item. Please read all instructions before beginning assembly. For ease of assembly two people are recommended. Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or hardware.
PAGE 2
ASSEMBLY: Assembly of the side rails and bed frame: Step#1 1. Attach Headboard (A) to Side Rail (C) using (6) Bolts #1 placed through (6) Small Rubber Washers #2 tighten using Allen Wrench #3. 2. Attach Footboard (A) to Side Rail (C) using (6) Bolts #1 Through (6) Small Rubber Washers #2. Tighten with Allen Wrench #3. Step #2 Attach Side Rail (C) and Metal Support Slats (D).
PAGE 3
To complete bed without canopy: Step #3 Insert (4) Finials (E) through (4) Large Rubber Washers #7 into top of Headboard (A). To complete bed with canopy: Step #3 Insert (2) Short Canopy Posts (E) Through (2) Large Rubber Washers #7 into the Headboard (A). Insert (2) Long Canopy Posts (F) with (2) Large Rubber Washer #7 into the Footboard (B).
PAGE 4
Step #4 Insert Finals (J) into top of Finial Base (I). Insert Finial Base (I) through Large Rubber Washer #7 into both the top of Short Canopy Post (E) and Long Canopy Post (F) as shown. Pay attention to the two holes on the Finial Bases (I) they should be facing toward the other holes on the other Finial Bases. Step #5 Insert Plugs #8 into the right hole of each Finial Base (I). Attach Short Stretchers (H) between the Headboard and Footboard posts as shown.