Instruction Manual
65
PFC-9000 • 5403535 • REV G • 9/08
Item Menu
The Item Menu is where about 80-90% of all the programming will occur. The Item Menu is where the user will add and modify
devices and adder cards, congure annunciators and add loop adders. The Item Menu congures the area of the panel that is selected.
Base Panel Modication
The Base Panel is the where the basic system design begins. The Base Panel must be highlighted, the Item Menu selected then
Modify. The screen below will display and the system base features can be modied. In the default programming the Fire Drill
and Manual Signal Silence are selected. In addition, the evacuation signal rate is defaulted at a continuous rate. If the re system
is a Class A wiring, then those boxes will need to be selected. Potter recommends that the Monitor Alert and smoke sensor Drift
Compensation is selected as well.