Instruction Manual

52
PFC-9000 • 5403535 • REV G • 9/08
The Run menu will bring up a dialog box similar to the picture on the previous page. Select browse and select the drive that
corresponds with CD ROM. Double click on the Conguration Software folder and open the Install.exe le. This will begin the
installation of the PFC Conguration Software onto the computer. The install.exe is only half of the set-up that is required to fully
load the PFC-Conguration Software.
The picture below is the screen that will be displayed when the install.exe le is executed. Click on the Start button and the
program will begin to load into the computer. In some cases the software will prompt the user and ask if they want to replace les.
Click on the “No To All” button and the software will nish loading. When the software is nished loading the bottom screen will
be displayed. Click on the OK and the software will prompt the user to create a shortcut on the desktop.