Instruction Manual

PFC-9000 • 5403535 • REV G • 9/08

PFC-9000 Fire Alarm Main Board Connections

Jumpers

JW 1 - Used when a PR-5000 or UDACT-9100 is installed. Remove the jumper any time one of these devices is added.

JW 2 - For factory programming only, not for eld use, DO NOT MODIFY

JW 3 - For factory programming only, not for eld use, DO NOT MODIFY

JW 4 - For factory programming only, not for eld use, DO NOT MODIFY

Plug Connections

P1 - Not Used

P2 - RS-485 connection for computer programming connection

P3 - Not Used

P4 - Port for connecting PR-5000 or UDACT-9100

P5 - Loop Adder connection port

P6 - Circuit adder card communication connection

P7 - Factory use only

P8 - Power connection for adder cards

P9 - RS-232 connection for printer or CRT

P10&11 - Power connection to bridge rectifer

P12&13 - Connection for 24VDC batteries

P14 - Connection for LCD display board F1 – 20 Amp AGC or equivalent battery fuse

FIELD WIRING TERMINALS

JW1

P14

JW3

JW2

JW4P7P9

P10 P11 +BDG- P12 P13 +BDG-

MAIN FIRE ALARM BOARD

DWG# PFC-9000-13