Instructions / Assembly

ManualsBrandsPostal PRO ManualsHardwareBlack The Lexington Mailbox and Post Kit

Installation Instructions

The Lexington Mailbox and Post Kit

WARNING: “Call Before You Dig” – Dial 811.

811 is the designated “call before you dig” phone number that directly

connects you to your local One Call center. Each state has different

rules and regulations governing digging to insure that buried utility lines

will not be disturbed.

* Actual Diameter of a Standard 4" x 4" Pressure Treated Post: 3-1/2" x 3-1/2"

PLEASE NOTE: Concrete may be needed if installing in loose soil

RECOMMENDED TOOLS & SUPPLIES:

• POST HOLE DIGGER

• LEVEL

• PHILIPS HEAD POWER SCREWDRIVER

• PRESSURE TREATED 4" x 4" x 72" WOODEN POST* (Not Included)

PARTS LIST:

Model: PP350

HARDWARE:

Shown at actual size

(3) #14 x 1-1/2" Phillips Pan Head Wood Screws

(4) #10 – 24 x 1-1/2" Phillips Machine Bolts

(4) #10 – 24 Nuts

(1) 1/4 - 20 x 1" Phillips Machine Bolt

(1) 1/4 - 20 Nut

(4) #10 – 24 x 1/2" Phillips Machine Bolts

(4) #10 – 24 Nuts

(1) #14 x 3" Phillips Pan Head Wood Screw

Upper

Post

Section

Pyramind

Finial

Steel L

Bracket

(2) Mounting Brackets

Mailbox

Body

Mailbox

Door

(2) Mailbox Pins

Decorative

Support Piece

Lower

Post

Section

Summary of content (4 pages)

PAGE 1
Installation Instructions The Lexington Mailbox and Post Kit Model: PP350 RECOMMENDED TOOLS & SUPPLIES: WARNING: “Call Before You Dig” – Dial 811. • POST HOLE DIGGER • LEVEL • PHILIPS HEAD POWER SCREWDRIVER • PRESSURE TREATED 4" x 4" x 72" WOODEN POST* (Not Included) 811 is the designated “call before you dig” phone number that directly connects you to your local One Call center. Each state has different rules and regulations governing digging to insure that buried utility lines will not be disturbed.
PAGE 2
48" 24" Fig. 1 STEP 1 Determine location for mailbox. Using post hole digger, dig a hole 24" in depth. Install treated pine post by burying 24" of the post in the ground - leaving 48" of post above ground. Using a level, make sure post is perfectly vertical before packing soil / adding concrete to permanently secure post into position. Fig. 2A Fig. 2B STEP 2 Slide the Lower Post Section over the wooden post.
PAGE 3
G C F Fig. 4 D Fig. 5 STEP 4 Attach the Decorative Support Piece to the Upper Post Component using (1) #14 x 3" Pan Head Screw G in the upper hole and using (1) #14 x 1-1/2" Pan Head Screw F in the lower hole. Both of these screws are included in the kit. STEP 5 Connect the Decorative Support Piece to the Steel L Bracket using (1) 1/4 - 20 x 1" Phillips Machine Bolt C and (1) 1/4" – 20 Nut D . This bolt and nut are included in the kit. 4x A B 4x Fig.
PAGE 4
B E 4x 4x Fig. 8A Fig. 8B STEP 8 Securely attach your mailbox to the Mounting Brackets using the (4) #10 – 24 x 1-1/2" Phillips Machine Bolts (included in the hardware kit). E and (4) #10 – 24 Nuts B The Postal Pro is a Creative Solutions, LLC Product Manufactured in Purvis, MS Fig. 9 STEP 9 Attach the Pyramid Finial to the top of the Upper Post Section by pressing and snapping firmly into place. Customer Service 877-544-5220 customerservice@creativesolutionscp.com www.postalpromailboxes.