Instruction manual

3.4.3.3. 8 pin Header/Jumper X102

Layout of 8 pin Header/Jumper (male)

The 8 pin Header/Jumper is an additional interface for user signals and trigger resources.

Table 3.14. Pinout of 8 pin Header/Jumper X102

PIN SIGNAL NAME DESCRIPTION

1 GND Ground for BoardID Jumper

2 BoardID Signal for BoardID Jumper

3 GND Ground

4 TRIGIN_TTL2_USERIN1 TTL Trigger input; also

readable by software

5 GND Ground

6 User_Out0 settable by software;

TTL-Level

7 User_Out1 settable by software;

TTL-Level

8 User_Out2 settable by software;

TTL-Level

Chapter 3. Hardware Reference