Instruction manual

3.4. p3i_CL/PMC-Hardware
3.4.1. Block Diagram p3i_CL/PMC
3.4.2. Technical Details of p3i_CL/PMC
The frame grabber is capable of handling 10 different data modes. Cameras with 8 bits to 16 bits per pixel
and multiple channels are supported.
The pixel clock is taken directly from the camera to satisfy setup and hold timings. Additionally the frame
grabber provides a clock output which is programmable in its frequency.
The region of interest, i.e. the part of the video information that is acquired, can be defined on a pixel
basis for all 3 channels - not always the whole frame has to be acquired.
The control signals to synchronize the camera on external events and to adjust variable exposure timings
are programmable via software.
Chapter 3. Hardware Reference
33