Instruction manual

3.2.3.1. Frame Grabber Interface X100 of p3i_DIG

Layout of 100 pin Mini-Delta-Ribbon Connector (Receptacle)

This is a 100 pin half pitch Mini Delta Ribbon Connector (MDR) which contains the 32-bit data bus, 7 input

signals, 7 camera control signals, 1 TTL trigger input, 1 TTL trigger output and 1 optocoupled input.

Table 3.3. Pinout of 100 pin Mini-Delta-Ribbon Connector(Receptacle)

SIGNAL NAME PIN SIGNAL NAME PIN

Ground A1 Ground B1

TriginTTL0 A2 TrigoutTTL B2

TriginOpt0+ A3 TriginOpt0- B3

EXPOSE(+) A4 EXPOSE(-) B4

PRIN(+) A5 PRIN(-) B5

DIFFOUT_0(+) A6 DIFFOUT_0(-) B6

DIFFOUT_1(+) A7 DIFFOUT_1(-) B7

EXTCLK(+) A8 EXTCLK(-) B8

DIFFOUT_2(+) A9 DIFFOUT_2(-) B9

DIFFOUT_3(+) A10 DIFFOUT_3(-) B10

PCLK(+) A11 PCLK(-) B11

FR_EN(+) A12 FR_EN(-) B12

LN_EN(+) A13 LN_EN(-) B13

DIFFIN_0(+) A14 DIFFIN_0(-) B14

DIFFIN_1(+) A15 DIFFIN_1(-) B15

DIFFIN_2(+) A16 DIFFIN_2(-) B16

DIFFIN_3(+) A17 DIFFIN_3(-) B17

VDATA0(+) A18 VDATA0(-) B18

VDATA1(+) A19 VDATA1(-) B19

VDATA2(+) A20 VDATA2(-) B20

VDATA3(+) A21 VDATA3(-) B21

Chapter 3. Hardware Reference