Instruction manual

List of Tables
3.1. Bit Assignments for Appropriate Data Mode of p3i_DIG 15
3.2. Used SODIMM Capacity Dependent on Selected Data Mode 19
3.3. Pinout of 100 pin Mini-Delta-Ribbon Connector(Receptacle) 20
3.4. Pinout of 16-Pin Header X101 22
3.5. frame grabber LED 23
3.6. Used SODIMM Capacity Dependent on Selected Data Mode 27
3.7. Pinout of 26 pin Mini-Delta-Ribbon Connector X1000 (Receptacle) 29
3.8. Pinout of 15 pin high-density female Min-D (X1002) 30
3.9. Pinout of 16-Pin Header X101 31
3.10. frame grabber LED 32
3.11. Used SODIMM Capacity Dependent on Selected Data Mode 36
3.12. Pinout of 26 pin Mini-Delta-Ribbon Connector X100 (Receptacle) 38
3.13. Pinout of 9 pos. Micro-D (X101) 39
3.14. Pinout of 8 pin Header/Jumper X102 40
3.15. Electrical Specifications for Differential Signals p3i_DIG 43
3.16. Electrical Specifications for Differential Signals p3i_CL 43
3.17. Electrical Specifications for TTL Signals 43
3.18. Electrical Specifications for Opto-coupled Input Signals 44
3.19. Power Requirement 44
3.20. Maximum Pixel Clock Frequency 44
3.21. Maximum Pixel Clock Frequency 45
3.22. Environmental Conditions 45
5.1. Initialization 52
5.2. Configuration and Video Input 52
5.3. Acquisition and Buffer Management 52
5.4. Timing/Synchronisation 52
5.5. File I/O 53
5.6. Miscellanious 53
5.7. Camera Adaptation module functions 53
5.8. Acquisitionmode 81
5.9. Warning codes 81
5.10. Unknown error codes 82
5.11. Error codes 82
5.12. Extended error codes 84
5.13. EL_FGITEM 85
A.1. 90
x