User's Manual

ManualsBrandsPositec Technology ManualsRoboticsRobotic mopping cleaner

START CLEANING

Your Florio A10 has 3 cleaning mode options: dry mopping, wet mopping or dry + wet mopping. The mode can be selected on top of the docking station or

through the NOESIS HOME app. Note: Dry + Wet Mopping mode: the robot will dry mop first, when finished, it will go back and wet mop. If the battery depletes

before the job is completed, the robot will return to the docking station to charge and will resume cleaning where it left off when it is fully charged.

1. Add water and cleaning solution

A. Remove the water tank by pressing the release

button on the back of the tank and pulling out.

B. Remove the rubber stopper and fill the water

tank with water. If desired, add a cap full of the

provided cleaning solution to the water tank.

NOTE: Do not fill the water tank with cleaning

solution alone as it will clog the water outlets.

C. Firmly press the rubber stopper back into the

water tank.

D. Slide the water tank back into the robot.