User's Manual

IEEE802.11b data rates of 5.5 and 11Mbps

IEEE802.11g data rates of 6, 9, 12, 18, 24, 36, 48, 54Mbps

Application: Access Internet, Data transfer/receive

1-2

PC System Requirements:

•300MHz or faster CPU

• Windows

XP operation system

• Card slot which supports SPI

• Memory: 64MB or above, 128MB recommended

• One available USB port, USB 1.1 standard

• Windows®98 SE,Me,2000,and XP

1-3

Product Contents

• WLAN SPI Adapter

• CD-ROM for installation software and documentation

• Quick Installation Guide

(2). Add WLAN 802.11b/g

Module to Your Device

By embedding the Socket Module, you can incorporate the latest in Wi-Fi® hardware and

software certifications, take advantage of broad industry accepted standards, and position

your products for use in complex corporate infrastructures.

The WLAN 802.11b/g

Module is IEEE802.11 b/g and CCX 4.0 certified, providing

interoperability and security within wireless LAN networks. It has a 36-pin uBGA package

and supports multiple interfaces including Serial Peripheral Interface and Secure Digital I/O;

it is WLAN-Bluetooth coexistence ready. When paired with powerful configuration

software like Enhanced Wi-Fi Companion, the WLAN 802.11b/g

Module provides the

optimal WLAN solution to incorporate into your device.

Step1.: Software Setup

Software Setup for Windows 98 SE, Me, 2000, and XP

To install the software for the SPI Adapter , follow the instructions below:

Note: the installation Process for Windows CE5.0 may look slightly different from

windows 98 SE, Me, and 2000

Note: DO not insert the SPI Adapter into the SPI port prior to software installation

Insert the software installation CD-ROM into the MT-2000 SD slot

The “Software Installshield Wizard” Windows appears. Click on “Next” to begin the

Installation Process.