User's Manual

9
2. Slide the hand strap cover down in the
direction indicated by the arrow.
3. Remove the hand strap cover from the rear
side of the tablet.
4. Go through the Connecting the Pistol Grip onto MT-4308W/R &
MT-4310W/R & MT-4210A/R section which is described
previously to complete the installation of the pistol grip onto the
tablet.
Installing micro SD Card card in MT-series
Please follow the below steps complete the installation of micro SD card.
1. Turn off MT-series completely. Then, pull off the rubber cover
located on the right side of your tablets to find micro SD card slot
2. To insert a micro SD card into the micro
SD card slot, make sure the side with the
golden finger of the card faces
downwards, and then slide the card down
into the slot
3. Pull off the rubber cover to close the compartment.
4. If you attempt to release a micro SD card from the slot, push the
card with your fingertip to slide it out.