User's Manual

Installing the VCOM Driver and Utility

If your BB-3000W works in the HID mode, you do not need to install any

driver but install the utility for BB-3000W; if your BB-3000W works in the

VCOM mode, please install the VCOM driver first.

After pairing the BB-3000W bump bar with its USB dongle connected to your

host terminal, go to the Posiflex’ global website: http://www.posiflex.com/en-

global/Download/download to download the up-to-date VCOM driver and

software utility.

After downloading the VCOM driver and utility, firstly start to install the

VCOM driver for the USB dongle.

Then, double click the “InstallShield (R) Setup

Launcher” icon in the BB-3000W bump bar

setup tool folder to install this utility.

Programming the BB-3000W and Setting up USB Dongle

Programming the BB-3000W

1. After completing in installing this utility,

double click the “Posiflex BB3000W Setup

Tool” icon.

2. Select BB3000W Editor Setup Tool (1) and

then click Open (2).