User manual

Poseidon MKVI User Manual Appendix 1
Page 73
T# Time (sec) Description Error Code Solution
7
9
15
17
8
14
16
Backpack EEPROM. This tests the EEPROM (static memory)
in the backpack processor, which contains user-selectable
conguration information, for internal errors or data corruption.
Battery EEPROM. This tests the EEPROM (static memory)
in the battery processor, which contains user-selectable con-
guration information, for internal errors or data corruption.
Firmware Version Compatibility. This test compares the
versions of rmware installed on each of the system proces-
sors, and ensures they are compatible with each other.
Primary Display Backlight. This test measures the amount of
electrical current consumed by the backlight of the Primary
Display, when the backlight is turned on with maximum bright-
ness. After this test has completed, the backlight remains on
for the remainder of the tests.
Battery ROM / RAM / Fuses. This tests the RAM, ROM and
fuse settings of the electronics in the battery processor. The
RAM is tested only by the factory or when new rmware is
installed, and the results used for all subsequent power-up
routines. Other tests are conducted on each power-up routine.
Battery Data logger. This test ensures that the data log
circuitry in the Battery is functional and accessible.
Battery State-of-Charge. This tests the circuitry that calculates
the State-of-Charge (SoC) for the battery, by measuring the
base-level electrical current consumed by the electronics.
Many of the tests that follow this test rely on an accurate SoC
calculation.
1
1
1
9
1
2
8
6=Bad
EEPROM
6=Bad
EEPROM
7=Battery
Mismatch
8=Non-Batt.
Mismatch
11=Current
too low
12=Current
too high
4=Bad RAM
5=Bad Fuse
13=Bad Chip
9=Current
too low
10=Current
too high
3=Bad ROM
1) Standard Response; 2) If test continues to fail, reset system parameters;
3) If test failure persists, contact an authorized Poseidon Service Center for
repair.
1) Standard Response; 2) If test continues to fail, reset system parameters;
3) If test failure persists, contact an authorized Poseidon
Service Center for repair.
1) Standard Response; 2) If test continues to fail, attempt to reinstall
Firmware (may cause unrecoverable failure); 3) If test failure persists, contact
an authorized Poseidon Service Center for repair.
1) Standard Response; 2) If test failure persists, or if backlight does
not turn on during this test, contact an authorized Poseidon Service
Center for repair.
1) Standard Response; 2) If test failure persists, contact an authorized
Poseidon Service Center for repair.
1) Standard Response; 2) If test failure persists, contact an authorized
Poseidon Service Center for repair.
1) Standard Response; 2) If test continues to fail, try a different battery;
3) If test failure persists, contact an authorized Poseidon Service Center
for repair.
1) Standard Response; 2) If test continues to fail, attempt to reinstall
Firmware (may cause unrecoverable failure); 3) If test failure
persists, contact an authorized Poseidon Service Center for repair.