User guide

Portsmith USB/Ethernet Charging Cradle User Manual 3
Operating the Cradle
The cradle helps you perform three basic functions:
1. Communication
2. Charge your handheld terminal
3. Charge your spare battery
Setting Your Communication Path
The switch on the side of the cradle can be set in either of two positions:
NETWORK
Move the switch to the left-hand position for NETWORK communications. While in this position, you will
be able to communicate via your network, to a networked device or the internet. The Switch is recessed,
so you might need to use your terminal’s stylus to change settings.
USB
Move the switch to the right-hand position for USB communications. While in this position, you will be
able to communicate via USB, to any USB host or peripheral device.