User guide

Portsmith USB/Ethernet Charging Cradle User Manual 1
Introduction
This manual describes the set up and operation of the
PS6SMC3000UE & PS6SMC70UE Single-slot Ethernet
and USB charging cradles. These cradles serve as
essential data communications devices, enabling you
to communicate between your Symbol
®
MC3000 or
MC70 series terminals and your Host Computer or your
network. The cradles also charge both your terminal and
a spare battery – all while performing communication
operations via a USB or network connection.
PORTS FUNCTION
1 USB Mini-AB Used to connect the cradle directly to any
USB host or peripheral device.
2 RJ45 Network Used to connect the cradle directly to your
network.
3 12VDC 3.33A (Power) A standard barrel port used for connecting
the power adapter. The power adapter is
available separately from Portsmith
FEATURES FUNCTION
4 Spare Battery Charger The Spare Battery Charger is located in the
tray on the back side of the cradle.
5 Network/USB Switch This switch is used to select which type of
communication will be used.
A switch (5) on the side of the
cradles controls which type of
communication the cradle is to
perform. Once you have set the
switch, you can communicate with
a USB host (1) or peripheral device
via USB or with other computers or
websites via your network (2).
There are three connection ports on
the rear of the cradles: