Porto-Power Blackhawk Automotive is a licensed trademark Air Actuated Hydraulic Treadle Pump Operating Instructions & Parts Manual B65425 B65426 B65427 SFA Companies ©2005 10939 N. Pomona Ave. Kansas City, MO 64153 816-891-6390 sales@blackhawk-automotive.
SAVE THESE INSTRUCTIONS For your safety, read and understand the information contained within. The owner and operator shall have an understanding of this product and safe operating procedures before attempting to use this product. Make certain that the operator thoroughly understands the inherent dangers associated with the use and misuse of the product. If any doubt exists as to the safe and proper use of this product as outlined in this factory authorized manual, remove from service immediately.
Foot Pedal Oil Output Port Manifold Plug Air Input Port Plastic Cap Reservoir Figure 1 - Model B65425 Components Reservoir Cap (not shown) Foot Pedal Air Input Port Reservoir Manifold Plug Plastic Cap Oil Output Port Figure 2 - Model B65426 Components Foot Pedal Oil Output Port Manifold Plug Air Input Port Plastic Cap Reservoir Figure 3 - Model B65427 Components 3
SAFETY INSTRUCTIONS BEFORE USE Replace shipping plug (red color) with air vent plug (black color) before use. (for model B65425 and B65427 only) Note: Always check connections before using. Alteration of these products is strictly prohibited. Use only those adapters and attachments provided and approved by the manufacturer. Note: Always secure threaded port connections with non-hardening pipe thread compound. Tighten securely to prevent accidental removal of components while in use.
MAINTENANCE (continued) Adding Hydraulic Fluid 1. Depressurize and disconnect hydraulic hose from application. 2a. For Model B65425 and B65427: With pump in it's upright, horizontal position, remove the air vent plug located on the top plate of the reservoir. 2b. For Model B65426: With pump in it's vertical position, remove the reservoir cap located on the reservoir. 3. Use a small funnel to fill reservoir to within 3/4" (19mm) of the opening. Note: Use only a good quality hydraulic jack fluid.
REPLACEMENT PARTS Available Parts: Please refer to the Parts drawing when ordering parts. Not all components of the pump are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence. When ordering parts, give Model number, serial number and description below. Call or write for current pricing: SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153, U.S.A. Tel:(816)891-6390 Fax:(816)891-6599 E-Mail: sales@blackhawk-automotive.
Model B65425 Replacement Parts Item Part# Description Qty.
Model B65426 Replacement Parts Figure 5 - Replacement Parts Illustration for B65426 8
Model B65426 Replacement Parts Item 1 2 3 4 5 Part# A18-6-5011-101 * A18-6-5012-204 A18-6-5003-102 649-1-0050-055 Description Reservoir cap O-ring Cover Cylinder Screw M5x0.8x16L Qty.
Model B65427 Replacement Parts Figure 6 - Replacement Parts Illustration for B65427 10
Model B65427 Replacement Parts Item Part# Description Qty.
ONE YEAR LIMITED WARRANTY For a period of one (1) year from date of purchase, SFA Companies will repair or replace, at its option, without charge, any of its products which fails due to a defect in material or workmanship under normal usage. This limited warranty is a consumer's exclusive remedy. Performance of any obligation under this warranty may be obtained by returning the warranted product, freight prepaid, to SFA Companies Warranty Service Department, 10939 N. Pomona Ave., Kansas City, MO 64153.