Porto-Power Blackhawk Automotive is a licensed trademark Porto-Power Kit Operating Instructions & Parts Manual Model Number B65114 B65115 Capacity 4 Ton 10 Ton Model B65114 㙀䴷࣋㺘 03D Model B65115 㙀䴷࣋㺘 03D ⑩㈢ ⑥⑾ ⒀⒆ ⒀⑾ ! This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
SAFETY and GENERAL INFORMATION Save these instructions. For your safety, read and understand the information contained within. The owner and operator shall have an understanding of this product and safe operating procedures before attempting to use this product. Instructions and Safety information shall be conveyed in the operators native language before use of this product is authorized.
SPECIFICATIONS Model Pump Capacity Ram Capacity (psi) B65114 B65115 Ram Number of Attachments Weight (ton) Closed Height (in) Extended Height (in) Effective area (in2) 8,000 4 11 15 3/4 0.998 14 46 10,000 10 13 5/8 19 3/4 2.411 13 84 (lb) ! WARNING Failure to comply with the following warnings may result in personal injury as well as property damage. Do not pull, position or move ram setup by the hose. Use carrying handle or other means of safe transport.
BEFORE USE OPERATION 1. Before using this product, read the owner's manual completely and familiarize yourself thoroughly with the product, its components and recognize the hazards associated with its use. 2. Inspect before each use. Do not use if bent, broken, leaking or damaged components are noted. 3. Check to ensure that all parts of your kit are included (see illustration and parts list). 4. Carefully remove the dust caps and plugs from hose coupler and ram coupler. 5.
Basic Setup The capacity of the body repair kit can be significantly affected by the number of attachments used and the type of load applied. The approximate load capacity of each function setup is illustrated below. When two or more extension tubes are used together, be sure to position the shortest tube further away from the ram. Note: Not all accessories in the illustrations provided in the Porto-Power Kits. A.
MAINTENANCE Cleaning Periodically check the pump piston and ram for signs of rust or corrosion. Clean as needed and wipe with an oily cloth. 1. Inspect hoses and connections daily. Replace damaged components immediately with Porto-Power Automotive Replacement Parts only. 2. Tighten connections as needed. Use pipe thread sealing compound when servicing connections. 3. Use only a good grade hydraulic oil.
TROUBLESHOOTING GUIDE The following information is intended as an aid in determining if problem exists. Pump and ram should be repaired only by authorized Porto-Power Service Center. For repair service, contact service center in your area. Symptom Possible Causes Corrective Action Erratic action • Air in system or pump cavitation. • External leakage in ram. • Ram sticking or binding. • Vent the system (refer to figure 3). • Contact service center. • Contact service center.
REPLACEMENT PARTS Not all components of the porto-power kit are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence. When ordering parts, give Model number, serial number and description below. Call or write for current pricing: SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153, U.S.A. Tel:(888)332-6419 Fax:(816)891-6599 E-Mail: sales@blackhawk-automotive.com Model B65114 Item Part No.
Model B65115 Item Part No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 - B65188 B65189 B65291 B65068 B65123 B65173 B65180 B65169 B65172 B65168 B65167 B65166 B65179 B65165 B65164 B65163 B65162 F040-90107-K02 B69478 B69477 F040-20012-000 F100-90009-K01 F100-80001-000 F1000S-85 B65115-L0 B65114-M0 Description Qty Pump Assembly Ram Assembly Hose Assembly Blow Molded Case Hydraulic Spreader (1000 lb.
ONE YEAR LIMITED WARRANTY For a period of one (1) year from date of purchase, SFA Companies will repair or replace, at its option, without charge, any of its products which fails due to a defect in material or workmanship under normal usage. This limited warranty is a consumer's exclusive remedy. Performance of any obligation under this warranty may be obtained by returning the warranted product, freight prepaid, to SFA Companies Warranty Service Department, 10939 N. Pomona Ave., Kansas city, MO 64153.
Load - Pressure Correlation For Model B65114 & B65115 Always monitor the force applied to workpiece by using a load cell and indicator or you may monitor pressure developed in the ram by using an inline pressure gauge, then calculate the applied force using the formula: F=PxA where F = Force/ Load (lb); P = Hydraulic working pressure (psi) and; A = Ram effective area (in²) For model B65114, A = 0.998 in² ; For model B55115, A = 2.
Load - Combination Correlation For Model B65114 & B65115 Always consider the number of attachements that you are using and follow the combonation load suggestions in the Basic Setup section on page 5. Follow the below table for correlation between percentage, load and pressure. Percentage % 100% 50% 25% 12.5% B65114 Load (lb) Pressure (psi) 8,000 8,016 4,000 4,008 2,000 1,000 2,004 1,002 B65115 Load (lb) Pressure (psi) 20,000 8,295 10,000 4,148 5,000 2,500 SFA Companies 10939 N. Pomona Ave.
