User's Manual

GND

BROWN SIREN

H2-2 Purple/black wire – (-) 300mA Channel 5 Output –

Same function as H2-2. This feature allows you to remote other electric device.

H2-3 Yellow/green –300mA optional trunk output –

This feature allows you to remote control trunk release.

H2-4 Red/black wire – (-) 300mA Channel 6 Output –

Same function as H2-2. This feature allows you to remote other electric device.

H2-5 Blue wire – (-) 300mA Channel 1 Output –

Same function as H2-2. This feature allows you to remote other electric device.

H2-6 Yellow/black wire – (-)300mA Ignition 3 output.

Some newer vehicles use a third ignition wire that is required to start and keep the vehicles engine running.

Don’t connect any vehicle circuits together, they are isolated for a reason.

H2-7 White parking light output

This wire should be connected to the (+) parking light wire.

H2–8 Red wire – System power (+12V Constant)

The RED wire supplies power to the system. Connect this to a constant +12 volt source.

H2-9 White wire – parking light input –

Please refer to H2-7 white wire.

H2-10 Brown (+) siren output

This output can be used if an optional siren is installed. Connect this to the RED wire of the siren, Connect the

BLACK wire of the siren to (-) chassis ground, preferably at the same point as the control module’s BLACK

ground wire.

WHITE PARKING LIGHT OUTPUT

LEFT

PARKING

LIGHT

RIGHT

PARKING

LIGHT

FUSE BOX

15A

FUSE

BLACK

RED

12V

BATTERY