User's Manual

In Commercial Confidence

REV: 1.9 (STANDARD, TLU100N-TLU200C-PTM-5.09-V1.27 TLU200C2)

I. BRIEF INTRODUCTION

TLU100N System utilizes the GPRS, GPS and car alarm functions in one unit. The unit continuously gets its precise

position and speed information from GPS system. It automatically manages and monitors all of its peripheral

equipment and their status all the time. It will send timely message to user if any predefined trigger occurs through

GPRS network system. With the unit user can track and control their target all the way easily and remotely.

• TCP/UDP optional Internet connections for monitor center server.

• SMS backup communication approach for more security design.

• Internet based scheduled report and periodic status reports programmable

• Concision PC setup or OVER the air to request and adjust parameter setting.

• All optional event report for money saving design.

• TLU100N ID and User ID double check design for safe manipulation.

• Up to 900 complete real time records capacity of flash memory for history review.

• 10 programmable geofence circles and 20 programmable geofence check points.

• Duty-On/Off report and accumulated distance, speed, duration statistic for one complete trip.

• Built-in tamper switch as trigger input for box open inform

• Built-in TL sensor for wake up in power-saving mode

• Humanism designed mini wireless Keypad with brief and easy operation command

• Up to 4 wireless magnetic door sensor input trigger.

• Optional wireless wide range temperature sensor

• Built-in solar panel with charging circuitry.

• Large built-in 14AH 12V Lead Acid capability battery to perform 4 weeks standalone operation

• Automatic power in from truck power, internal battery pack, or solar cells.

• Aggressive Power saving mode with sleep mode and automatic wakeup function.

• Designed to be aerodynamic to reduce drag on a trailer while in motion.

• Designed for location on top of the trailer; in the front, center or rear of the trailer unit.

• All devices are waterproof and extra strong structure design

II. Report INTRODUCTION

1. Report message format:

A report example form TLU100N to monitor center should be like this:

%%8888,A, 050929003153,N2240.6927E11359.3980,60,185,C+28,C3800000,253,CFG:1234,0Km/h,0Km/h,0Km,

0Min, 0Min|

The standard report sent by the unit includes the following information:

1) Device ID: 4 to 8 decimal digitals that has been set in User detail of PC-Setup

GPS valid flag: ‘A’ mean it is a update valid GPS data; ’L’ indicate a last known GPS data

3) Date & Time: The current date and UTC time with the format yy/mm/dd/hh/mm/ss, e.g.: 050926003153

4) GPS’s latitude and longitude: e.g.: N2240.6927E11359.3980

5) Speed: The current speed of the unit

6) Direction:0-360 degree of moving direction,0 is north and 180 is south etc.

7) Temperature: The environment temperature of TLU100N

8) Device’s status word: 32 bits (8 ASCII hex characters) status flag, every express a system status which being

monitored. E.g.: C3800000

9) Event code: Event number indicates a predefined trigger happened. e.g.: 120