User's Manual

7
SILENT ARMING WITH BYPASSING SHOCK SENSOR
a. In disarming state, press button 5 once then press button 3 once within 3 seconds.
b. Parking light will flash once, the system is entry in silent armed mode, all sensors
will be bypassed in this arming cycle.
HIDDEN ALARM ARMING
a. First press button 5 then press and hold button 1 for 2 seconds within 3 seconds
b. Siren will chirp twice and parking light will flash twice, the system will entry in no
alarm arming mode.
c. In this arming mode, the siren and parking light will not alarm if any sensor will be
triggered, but the system will remain send trigger signal to the transmitter.
ALARM PERIOD AND SOUNDING CYCLE
a. While arming, if any detector is triggered, the siren will sound 30 seconds (max) and
the parking light will flash 30 seconds (max).
b. For any single trigger, the siren will sound one cycle only. (One cycle is: sound 30
seconds and stop 3 seconds.)
c. For the same arming period, and for each single detector, the system can only be
triggered (single trigger) at most 8 times.
d. For each individual detector, the number of sounding cycle can be accumulated in
the same arming period. (E.g. If open the door, and let the siren sound 5 cycles, and
close the door, the siren will stop sound, then if open the door again, it can only
sound 3 cycles.)
e. After 8 cycles, the triggered detector will be bypassed. This detector will not be
triggered again in the same arming period.
f. The system is disarmed; the all the detector is return normal status.
TRANSMITTER DISPLAY REPORT WHEN SYSTEM TRIGGER
a. The system is in arming status.
b. If the shock sensor is warned triggered, piezo will continue sound.
c. If the shock sensor or ext sensor is fully triggered, the unit will send the information
to transmitter, piezo will continue sound.
d. If the door is triggered, the unit will send the information to transmitter, piezo will
continue sound.
e. If ignition has been triggered, the unit will send the information to transmitter, piezo