User's Manual

9
F1：01＂means： already in the menus of the function selection and show the First Status
in the menus 1.
F
UNCTION AS BELOW:
Button Functions Indication
1 once
Return to the above function
selection page
“F1：13＂ Show the function code if
success , for example: “F1：13＂
2 once
Go to the next function selection
page
“F1：02＂ Show the function code if
success , for example: “F1：02＂
3 once
Skip to the menus of the function
selection in next page (can be
circulatory)
“F2：01＂ Show the function code if
success , for example: “F2：01＂
Hold 1
for 2 sec.
Turn the chose function to factory
default and the main unit will
operate this indication
If success, siren chirp once, flash “SUC” for
3 times
If failure, siren chirp twice, flash “FAIL” for
3 times
Hold 2
for 2 sec.
Turn the chose function to the
second setting and the main unit
will operate this indication
If success, siren chirp once, flash “SUC” for
3 times
If failure, siren chirp twice, flash “FAIL” for
3 times
Hold 3
for 2 sec.
Turn the chose function to the
third setting and the main unit
will operate this indication
If success, siren chirp once, flash “SUC” for
3 times
If failure, siren chirp twice, flash “FAIL” for
3 times