User's Manual

In Commercial Confidence
11
175 Enter defined Circular Geofence area7
184 Exit defined Circular Geofence area8
185 Enter defined Circular Geofence area8
194 Exit defined Circular Geofence area9
195 Enter defined Circular Geofence area9
150 Press Valet switch to send ‘Help’ request
GROUP C In-vehicle INPUTS Event
253 (in-vehicle ACC) ACC on
Example: The ‘EVENT 253’ will be generated and sent to the server when ACC is on.
254 (in-vehicle ACC) ACC off
Example: The ‘EVENT 254’ will be generated and sent to the server.
257 Acceleration sensor triggerd
Example: The ‘EVENT 257’ will be generated and sent to the server when acceleration sensor is triggered.
259 General INPUT1 ON
Example: The ‘EVENT 259’ will be generated and sent to the server when general INPUT1 is triggered by low
pulse.
260 General INPUT1 OFF)
Example: The ‘EVENT 260’ will be generated and sent to the server when general INPUT1 is triggered by high
pulse.
261 General INPUT2 ON)
Example: The ‘EVENT 261’ will be generated and sent to the server when general Input2 is triggered by low
pulse.
262 General INPUT2 OFF)
Example: The ‘EVENT 262’ will be generated and sent to the server when general Input2 is triggered by high
pulse..
OUTPUT command ACK event
303 ARM (in-vehicle output) command Success
304 Panic mode (in-vehicle output) command Success
305 Anti-Car jacking (in-vehicle output) command Success
306 Emergency Release (in-vehicle output) command Success
308 Disable sleep function
309 Enable sleep function
402 GPRS connection request (SMS command)
403 GPRS disconnection request (GPRS command, let the UNIT go into GSM mode.
405 Stop store forward
406 Read the UNIT’s firmware version.
407 Check the UNIT Geofence status.
408 Read external battery level