User Manual

5
Valet Switch
(1) Send help report and enter the monitor mode (2) activate or deactivate Immediate
Geofence (3) Activate panic mode (4) sending ‘Duty on’ or ‘Duty off’ report to the
server (5) Emergency release to exit ‘ARM’, ‘Anti-carjacking’ or ‘Panic’ modes (6)
code learning for build in alarm, (7) set valet mode for build in alarm
2-button keypad (1) “II” Hang up a phone (2) “I” Answer a phone
Handset (Optional)
1. SMS send/receive
2. Phone call
3. Main unit information display
4. Immediate Geofence activate/deactivate
5. Help report sending
6. Duty on/off report
7. Emergency release
PC-setup
Initialize the unit and program the device, including Network APN, server IP address,
user message, report control, and Geofence setting, etc …
Note that Network APN and server IP details must be set before the installation.
Build in ALARM
(Optional)
If build in alarm is installed, the system will gather all the alarm information for the
remote monitoring. The server also has the ability to control the build in alarm.
Standard Report
Automatic report for AVL tracking purpose:
Fixed time report
Fixed distance report
Intelligent report (combine time and distance)
Keep alive report
Event Report
Temperature report
Speeding report
Low battery report
Geofence trigger report
Wake up report
ALARM trigger report, e.g. PANIC mode, ARM, ACC inputs, etc …
History data store 6000 report can be saved in unit, and read from server and pc-setup
III. IRKP-20 CONTROL