User Manual

Set Access Point Name (APN), User Name, Password. The maximum length of the APN, User name and

Password is 49 characters.

TCP/UDP address and Port number of the remote server being set, UNIT will send report to these address.

Note that only one TCP or UDP server will be used at the same time.

To select enable or disable local GPRS/SMS or Roam GPRS/SMS

After unit exited PC-SETUP, user can select GSM or GPS debug information output by hyper-terminal.

Note: The baud rate of Hyper-terminal must be correct.

Primary SMS numb: Set the SMS Number of the server. The unit will send reports to the server if GPRS

connection is failed.

The unit has speed dialing function, it can preset four telephone numbers defined by PC setup software. The

button , , , is indicate speed dialing key.