User's Manual

4
II. BASIC FUNCTIONS
FUNCTIONS APPLICATIONS
GPS
GPS receiver will output a complete position, velocity, and time (PVT) solution in the
NMEA Version 3.0 protocol
GPRS, SMS
GPRS use standard TCP or UDP communicate protocol. If the GPRS service is failed, the
SMS mode will be turned on for emergency use.
5 input
In-vehicle Door.
In-vehicle ACC
Temperature sensor port (optional)
Valet switch port
8 output
1. Parking light (-300mA)
2. Door Lock (-300mA)
3. Door Unlock (-300mA)
4. Start kill output (-300mA)
5. Siren/Horn output
6. Trunk Release (-300mA)
7. Channel 2 output (-300mA)
8. GPS output
GPS output interface
GPS port will output NMEA 0183 GPS data.
Data rate: 9600 bps
Valet Switch
(1) Sending HELP report (2) activate or deactivate Immediate Geo-fence (3) panic (4)
sending ‘Duty on’ or ‘Duty off’ report to the server (5) Emergency release to exit ‘ARM’,
‘Anti-carjacking’ or ‘Panic’ modes
PC-setup
Initialize the unit and program the device, including Network APN, server IP address, user
message, report control, and Geo-fence setting, etc …
Note that Network APN and server IP details must be set before the installation.
Standard Report
Automatic report for AVL tracking purpose:
Fixed time report
Fixed distance report
Intelligent report (combine time and distance)
Keep alive report
Event Report
Temperature report
Speeding report
Low battery report
Geo-fence trigger report
ALARM trigger report, e.g. PANIC mode, ARM, ACC inputs, etc …
History data store 900 report can be saved in unit, and read from server and pc-setup